Your position: Home > CO2 Laser Power Supply
- Description
- Order record
150-180W CO2 Laser Power Supply for CO2 Laser Engraving Cutting Machine HY-W150
Specification:
150W CO2 Laser Power power Main Features:

Specification:
Input | Input Voltage | AC220V(Need AC110V ,please specify ,when order) |
AC frequency | 47 - 440HZ | |
Max Input power | 1000W | |
Max Input current | 10A | |
Output | Max output voltage | DC50KV |
Max output current | DC38mA | |
Efficiency | >/=90%(Full load) | |
MTBF | >/=10000 Hours | |
Response speed | ≤ 1ms (Time from the TTL Signal is given to the output current up to 90% pre-setting current) | |
Withstand Voltage | Input-Output, Input-Enclosure: AC1500V 10mA 60S, Output cathode is connected with enclosure. | |
Environment | Operating temperature: (-10-40)degree Celsius,Relative humidity: ≤90% | |
Cooling | Forced air cooling (fan cooling) |
150W CO2 Laser Power power Main Features:
1. Good compatibility: It can be applicable to 150W-180W laser tubes manufactured by different Factories
2. High Voltage Power Supply: Input AC 220V or AC 110V Voltage .
3. Quick response speed and effect: High performance, large cutting power. It also can prolong laser tube’s working life
4. This Power Supply has the "TEST" button which can test output laser manually.
Connection between Power Supply and Laser Tube:
Terminal Definition:
Terminal definition as follow:
Connection between Power Supply and Controller:
Connection between Power Supply and Laser Tube:

Terminal Definition:
1 | 2 | 3 | 4 | 5 | 6 |
TH | TL | WP | G | IN | 5V |
Terminal definition as follow:
TH | Input Signal | Switch Light Control,High Level(>=3V)-Bright dipping,Low Level(<=0.3V)-No Light Dipping |
TL | Input Signal | Switch Light Control.High Level-No light Dipping,Low Level(<=0.3V)-Bright Dipping |
WP*1 | Input Signal | Switch Light Control,High Level(>=3V)- No light Dipping,Low Level(<=0.3V)-Bright Dipping |
G | Signal Ground | The foot must connected with laser machine's enclosure and ground properly. |
IN*2 | Input Signal | Laser Power supply control terminal can use 0-5V Analog Signal Control,also can use 5V PWM Signal to Control |
5V | Output Power | 5V,Max output Current 20mA |
Connection between Power Supply and Controller:
