Your position: Home > CO2 Laser Power Supply

150W CO2 Laser Power Supply for CO2 Laser Engraving Cutting Machine HY-T150

CO2 laser power supply widely used in laser processing for example, cutting, drilling,sculpture, engraving etc and laser systems.
Item Code: LMC-P-150-HY-T
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
Price:
    Please select the information you wantX
  • Voltage:
    110V 220V
+
-
Units
300 in Stock
  • Description
  • Order record
150W CO2 Laser Power Supply for CO2 Laser Engraving Cutting Machine HY-T150
 

Specification:
 
Input Input Voltage AC220V(Need AC110V ,please specify ,when order)
AC frequency 47 - 440HZ
Max Input power 1000W
Max Input current 10A
Output Max output voltage DC50KV
Max output current DC38mA
Efficiency >/=90%(Full load)
MTBF >/=10000 Hours
Response speed ≤ 1ms (Time from the TTL Signal is given to the output current up to 90% pre-setting current)
Withstand Voltage Input-Output, Input-Enclosure: AC1500V 10mA 60S, Output cathode is connected with enclosure.
Environment Operating temperature: (-10-40)degree Celsius,Relative humidity: ≤90%
Cooling Forced air cooling (fan cooling)

150W CO2 Laser Power power Main Features:
 
1. Good compatibility: It can be applicable to 150W laser tubes manufactured by different Factories
2. High Voltage Power Supply: Input AC 220V or AC 110V Voltage .
3. Quick response speed and effect: High performance, large cutting power. It also can prolong laser tube’s working life
4. This Power Supply has the ``TEST`` button which can test output laser manually.

Connection between Power Supply and Laser Tube:


Terminal Definition:
 
1 2 3 4 5 6
TH TL WP G IN 5V

Terminal definition as follow:
 
TH Input Signal Switch Light Control,High Level(>=3V)-Bright dipping,Low Level(<=0.3V)-No Light Dipping
TL Input Signal Switch Light Control.High Level-No light Dipping,Low Level(<=0.3V)-Bright Dipping
WP*1 Input Signal Switch Light Control,High Level(>=3V)- No light Dipping,Low Level(<=0.3V)-Bright Dipping
G Signal Ground The foot must connected with laser machine's enclosure and ground properly.
IN*2 Input Signal Laser Power supply control terminal can use 0-5V Analog Signal Control,also can use 5V PWM Signal to Control
5V Output Power 5V,Max output Current 20mA

Connection between Power Supply and Controller:
Buyer Country Price Quantity Order Date
No data Yet
Customer Reviews
+86 13552452963