40W CO2 Laser Power Supply Unit for CO2 Laser Engraving Cutting Machine MYJG-40WT B Model

Your position: Home > CO2 Laser Machine Parts > Laser power supply

Description
Order record

Product Features:

Main Technical Parameters:

Input	Input Voltage	AC 220V / AC 110V (Adjust with Switch)
	AC frequency	47 - 440HZ
	Max Input power	250W
	Max Input current	3A
Output	Max output voltage	DC23KV	DC5KV	DC24V
	Max output current	DC20mA	DC1A	DC2A
Efficiency		>/=90%(Full load)
MTBF		>/=10000 Hours
Response speed		≤ 1ms (Time from the TTL Signal is given to the output current up to 90% pre-setting current)
Withstand Voltage		Input-Output, Input-Enclosure: AC1500V 10mA 60S, Output cathode is connected with enclosure.
Environment		Operating temperature: (-10-40)degree Celsius,Relative humidity: ≤90%
Cooling		Force-Air Cooling(FAC)

Connection of the Power Supply:

Pin Definition:

P1:

1	2	3	4
L-	FG	AC	AC

L-: Connect Negative Electrode of Laser Tube.
FG: Connect with G Internal, and Connect the Power Supply Shell.
AC AC: AC 110V/220V Input.

P2:

1	2	3	4	5	6	7
P+	G	K-	K+	G	IN	5V

P+: Water-Protction Switch
G: Ground: The foot must connected with laser machine's enclosure and ground properly.
K-: Ground: The foot must connected with laser machine's enclosure and ground properly.
K+: Switch Laser Control:
High Level(≥3V)- Laser Off, Low Level(≤0.3V)-Laser On.
G: Ground: The foot must connected with laser machine's enclosure and ground properly.
IN: 0-5V Analog Signal Control Input, also can use 5V PWM Signal to Control
5V: 5V,Max output Current 50mA

P3:

1	2	3	4
L	5V	G	24V

24V: Output 24V, Max Current 2A.
G: Ground: The foot must connected with laser machine's enclosure and ground properly.
5V: Output 24V,Max Current 1A.
L: Switch Laser Control:
High Level(≥3V)- Laser Off, Low Level(≤0.3V)-Laser On.

Buyer	Country	Price	Quantity	Order Date
No data Yet

Language

40W CO2 Laser Power Supply Unit for CO2 Laser Engraving Cutting Machine MYJG-40WT B Model

Ships From:

Average rating:

You May Like