- Description
- Order record

Input |
Input Voltage |
AC 220V / AC 110V (Adjust with Switch) |
||
AC frequency |
47 - 440HZ |
|||
Max Input power |
250W |
|||
Max Input current |
3A |
|||
Output |
Max output voltage |
DC23KV |
DC5KV |
DC24V |
Max output current |
DC20mA |
DC1A |
DC2A |
|
Efficiency |
>/=90%(Full load) |
|||
MTBF |
>/=10000 Hours |
|||
Response speed |
≤ 1ms (Time from the TTL Signal is given to the output current up to 90% pre-setting current) |
|||
Withstand Voltage |
Input-Output, Input-Enclosure: AC1500V 10mA 60S, Output cathode is connected with enclosure. |
|||
Environment |
Operating temperature: (-10-40)degree Celsius,Relative humidity: ≤90% |
|||
Cooling |
Force-Air Cooling(FAC) |
Connection of the Power Supply:

P1:
1
|
2
|
3
|
4
|
L- | FG |
AC
|
AC |
L-: Connect Negative Electrode of Laser Tube.
FG: Connect with G Internal, and Connect the Power Supply Shell.
AC AC: AC 110V/220V Input.
P2:
1 | 2 | 3 | 4 | 5 | 6 |
G | P | L | G | IN | 5V |
G |
Signal Ground |
The foot must connected with laser machine's enclosure and ground properly. |
P |
Input Signal |
Water Protction Switch.
|
L |
Input Signal |
The control of laser: Low Level, emitting laser |
G |
Signal Ground |
The foot must connected with laser machine's enclosure and ground properly. |
IN |
Input Signal |
Laser Power supply control terminal can use 0-5V Analog Signal Control,also can use 5V PWM Signal to Control |
5V |
Output Power |
5V,Max output Current 50mA |
P3:
1 | 2 | 3 | 4 |
24V | G | 5V | L |
G:24V and 5V Ground.24V:output 24V,Max Current 2A,power for master board.
5V:output 24V,Max Current 1A.
L:The control of laser: Low Level, emitting laser