Your position: Home > CO2 Laser Machine Parts > Laser power supply

80-100W CO2 Laser Power Supply for CO2 Laser Engraving Cutting Machine HY-Es80

CO2 laser power supply widely used in laser processing for example, cutting, drilling,sculpture, engraving etc and laser systems.
Item Code: LMC-P-80-ES
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
Price:
    Please select the information you wantX
+
-
Units
200 in Stock
  • Description
  • Order record
80-100W CO2 Laser Power Supply for CO2 Laser Engraving Cutting Machine HY-Es80
 

Application:

HY-ES80 Laser Power Supply is used for 80W,100W Cutting and Engraving Acrylic, Fabric, Double Color Sheet and Rubber,ect.

Main Features:

1. Good compatibility: ES100 Power Supply is special designed for EFR 80w,100w Laser Tubes. Also can driver common 80W,100W laser tubes from other factories.
2. High Voltage Power Supply: Input AC 220V or AC 110V Voltage ,Max output DC 40KV.
3. You can choose Cutting Type or Sculpring Type; the Cutting Type has a good power stability and strong adaptability; the Sculpring Type has a quick response speed and good engraving effect.
4. This Power Supply has the” TEST” button which can test output laser manually.

Advantages:

1. Easy Control: The start and stop of laser can be easily controlled by TTL level. Both 0-5V analog signal and PWM signal can control the laser power.
The Laser Power Supply has output open circuit protection. when the earth connection is under good situation, Power can be short time work in open state, it Can avoid the laser tube burst damage caused by laser power supply, prolong the EFR laser tubes service life.
2. This Laser power supply has TTL signal indication, water through signal indication and laser output indication.
3. The power has feedback interface, can be used for closed-loop control, also can be used for testing the laser tube working current.
It can quickly judge laser tube is damaged or laser power supply is damaged at the scene, greatly facilitate the on-site maintenance.

Main Technical Parameters:
 

Input

Input Voltage

AC 90-250V

AC frequency

47 - 440HZ

Max Input power

500W

Max Input current

6A

Output

Max output voltage

DC40KV

Max output current

DC28mA

Efficiency

>/=90%(Full load)

MTBF

>/=10000 Hours

Response speed

≤ 1ms (Time from the TTL Signal is given to the output current up to 90% pre-setting current)

Withstand Voltage

Input-Output, Input-Enclosure: AC1500V 10mA 60S, Output cathode is connected with enclosure.

Environment

Operating temperature: (-10-40)degree Celsius,Relative humidity: ≤90%

Cooling

Forced air cooling (fan cooling)


Terminal Defination of the  Power Supply:



Terminal Definition of P4 as Follow:
 
TH Input Signal Switch Light Control,High Level(>=3V)-Bright dipping,Low Level(<=0.3V)-No Light Dipping
TL Input Signal Switch Light Control.High Level-No light Dipping,Low Level(<=0.3V)-Bright Dipping
WP*1 Input Signal Switch Light Control,High Level(>=3V)- No light Dipping,Low Level(<=0.3V)-Bright Dipping
G Signal Ground The foot must connected with laser machine's enclosure and ground properly.
IN*2 Input Signal Laser Power supply control terminal can use 0-5V Analog Signal Control,also can use 5V PWM Signal to Control
5V Output Power 5V,Max output Current 20mA

Connection Between Laser Power Supply and Controller:
 
Buyer Country Price Quantity Order Date
No data Yet
Customer Reviews
+86 13552452963