S&A CW-5000 is refrigeration type industrial water chiller of 800W cooling capacity. It’s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. There is 1 water outlet and an inlet, applicable to cool single laser glass tube.
S&A industrial water chillers are popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. With that 1 key solution, customers no longer need to worry about the water temperature adjustment of seasonal changes.
Features
1. 800W cooling capacity; use environmental refrigerant;
2. Compact size, long working life and simple operation;
3. ±0.3℃ precisely temperature control;
4. The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions;
5. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm;
6. Multiple power specifications; CE,RoHS and REACH approval;
7. Optional heater and water filter.
Specification:
One-stop automatic intelligent temperature control: in different environment, user does not need to change setting due to it will automatically switch
to appropriate operating temperature.
CW-5000DG: applied to cool a single 80W or 100W CO2 laser tube (emitting rate higher than 60%);
Model |
CW-5000DG |
Voltage |
110V |
Frequency |
60Hz |
Current |
0.3~4A |
Compressor power |
0.305KW |
0.41HP |
Refrigeration capacity |
2866Btu/h |
0.84KW |
722Kcal/h |
Refrigerant |
R-134a |
Refrigerant charge |
280g |
Precision |
±0.3℃ |
Reducer |
Capillary |
Protection |
Overcurrent protection for compressor, flow alarm, over temperature alarm |
Pump power |
0.03KW |
Tank capacity |
6L |
Inlet and outlet |
External Φ10mm barbed connector |
Max. lift |
10 M |
Max. flow |
10 L/min |
N.W |
24 Kgs |
G.W |
27 Kgs |
Dimension |
58 x 29 x 47 cm (L x W x H) |
Package dimension |
70 x 43 x 58 cm (L x W x H) |
Details:
Installation:
1, Open the package and check the machine and all accessories.
2, Open the mouth screw on the top of machine, add cooling water (Please don’t power the machine without water).
3, Connect the inlet and outlet hose between water cooler and your machine
4, Connect the power cable, turn the power switch (Note: Don’t let the water overflow).
5, Check the radiator water level again (Keep the distance between water level and mouth is 80 – 150mm).
Maintenance:
Change water once one month at least.
A cooler water condition in the absence of electricity is prohibited!
Location placed cooler should select a well - ventilated, dry environment, away from other heat sources.
Cooling machine no use for long time or in transport must keep emptying the cooling water.
Packing list:
CW-5000DG x 1pc