Your position: Home > CO2 Laser Machine Parts > Laser system controller

MPC6525A Leetro Laser controller/motion board for laser machine

Leetro MPC6525, advanced stand-alone 3-axis motion controller designed for laser engraving and cutting applications.
Item Code: LMC-C-6525A-M
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
Price:
(5% OFF)
(Only 19 days)
    Please select the information you wantX
+
-
Units
999 in Stock
  • Description
  • Order record



Leetro MPC6525A Co2 Laser Controller System for Laser Engraving and Cutting Machine
 

MPC6525A Leetro Laser Controller System (Include 6525A main board, Controller Panel, USB Dongle, USB Cable, Wire Cable, Screw)
MPC6525A Leetro Laser Controller Card / laser control system upgrades from MPC6515 and MPC6525 Co2 laser control system. The MPC 6525A can use on two laser cutting head machine, also can use for single laser cutting head machine, the MPC6525 can only use on single laser cutting head machine



Laser controller Leetro MPC6525A, advanced stand-alone 3-axis motion controller designed for laser engraving and Cutting applications. Incorporating the advanced Field Programmable Gate Array (FPGA) and a 32-bit DSP, MPC6525 provides dedicated motion control features. Motion Controller MPC6525 is famous as high performance, high stability, longer lifetime, high cost performance; it is the best Laser Control System for Laser Engraving and Cutting Machine.



  1 2 3 4 5 6
  +24V 24V GND        
X1 Foot-pedals witch Uncapping 
protection
Reverse 5v/24v GND +5V/24V  
X2 Z-axis 
Forward limit
Z-axis reverse limit Z-axis origin 5v/24v GND +5V/24V  
X3 Z-axis
Forward limit
Z-axis reverse limit Y-axis origin 5v/24v GND +5V/24V  
X4 Z-axis 
Forward limit
Z-axis reverse limit X-axis origin 5v/24v GND +5V/24V  
X5 Blow-off END USB flash disk 
instruction light
Reverse +5V/24V GND +5V/24V
Y1 Laser Power 
GND
Analog output Laser Power Laser Power on/off    
Y2 Z-axis pulse Z-axis direction 5V GND +5V    
Y3 Y-axis pulse Z-axis direction 5V GND +5V    
Y4 Y-axis pulse Y-axis direction 5V GND +5V    

X1: Input power interface (24VDC) 
Note: MPC6525 Motion Controller adopts mono 24VDC power supply. The other power pins are output 
JP1: 
Note: JP1 is related with X3, X4 and X5. If 24V voltage is required for input signal ports X3, X4 and X5, the jumper should be connected to Pin1 and Pin2. If 5V voltage is required, the jumper should be connected to Pin2 and Pin3. If the jumper is removed, disconnect Pin5 of X3, X4 and X5. 
JP2: 
Note: JP2 is related with Y2. For analog-control laser power, remove the jumper, connect laser power to Pin2. For PWM-control laser power, connect the power to Pin3. 
JP3: 
Note: JP3 is related with Y1. If output Y1 to drive a 24V relay, the jumper should be connected to Pin1 and Pin2. To drive a 5V relay, the jumper should be connected to Pin2 and Pin3. If the jumper is removed, disconnect Pin6 of Y1. 
JP4: 
Note: JP4 is related with X2. If 24V is required for the general input X2, the jumper should be connected to Pin1 and Pin2. If 5V voltage is required, the jumper should be connected to Pin2 and Pin3. If the jumper is removed, disconnect Pin5 of X2. 
Wiring: 
Limit and Origin switches applied with MPC6525A Laser Control System can be contact switch or NPN proximity sensor. Digital outputs of MPC6525 can drive intermediate relay or photo coupler. Refer to the following wiring diagram. 
Stepper motor drives or digital servo motor drives receive Pulse/Direction outputs generated from MPC6525 Laser Controller. Refer to following wiring diagram of Pulse/Direction signals. 



1.Old Laser Control System Upgrade:
Refresh your co2 laser cutter /co2 laser engraver from slow and old controller.
Match all settings in your co2 laser machine. Can 100% perfect work with all Co2 laser cutting system from China. 
2.Co2 Laser Cutter Dsp Control System Maintenance and Replacement:
Broken old controller away and test a new high speed perfect cutting and engraving effects.
Don't need to wait a long term repair. Take a little time to restart your program.
3.DIY Laser CNC Cutter:Laser Cutter Controller, especially for homemade laser cutter, hobby diy laser cutter and Portable 
Laser Cutter. Cutting effects will never disappoint you.
Also you may need co2 laser cut kit, laser tube and more spare parts in our online store.
4.DIY Laser cnc engraver:
Co2 Laser Engraver Controller, especially for household laser engraver, self-made diy laser engraver and Mini Laser Engraver. High speed is the best point for engraving.
Smaller hobby laser engraver with this controller can work in a 400-600 speed.
Max 50% working time saved. Time is money!



Model Description Qty(pc)
MPC6525A Motion Control Board 1
Buyer Country Price Quantity Order Date
No data Yet
Customer Reviews
Average rating:

+86 13552452963